User Preferences 4 - 5
Power Mode
This parameter deter mines wh ether or not the scanner en te rs re duced po we r mode a fter a decode attempt. Whe n
in reduced power mode, the scanner draws less current from its battery.
Continuous On
*Reduced Power Mode
Laser On Time
This parameter sets the maximum time that decode processing continues during a scan attempt. It is
programmable in 0.1 second increments from 0.5 to 9.9 seconds. The default Laser On Time is 3.0 seconds.
To set a Laser On Time, scan the bar code below. Next, scan two numeric bar codes from Appendix D, Numeric
Bar Codes that correspond to the desir ed on time. Includ e a le adi ng zero for single digit numbe rs. For examp le, to
set a Laser On Time of 0.5 seconds, scan the bar code below , then scan the 0 and 5 bar codes. To corr ect an error
or change the selection, scan Cancel on page D-3.
Laser On Time