RS-232 Interface 6 - 3
RS-232 Default Parameters
Table 6-1 lists the defaults for RS-232 host parameters. To change any option, scan the appropriate bar code(s)
provided in the param eter descriptions section beginning on page 6-4.
NOTE See Appendix A, Standard Default Parameters for all user preference, host, symbology, and
miscellaneous default parameters.
Table 6-1
RS-232 Host Default Table
Parameter Default Page
Number
RS-232 Host Parameters
RS-232 Host Types Standard RS-232
6-6
Baud Rate 9600
6-7
Parity None
6-9
Check Receive Errors Enable
6-10
Stop Bit Select 1 Stop Bit
6-11
Data Bits 8-Bit
6-11
Hardware Handshaking None
6-12
Software Handshaking None
6-14
Host Serial Response Time-out Minimum: 2 sec
6-16
RTS Line State Host: Low RTS
6-17
Beep on <BEL> Disable
6-17
Intercharacter Delay Minimum: 0 msec
6-18
Nixdorf Beep/LED Options Normal Operation
6-19
Ignore Unknown Characters Send Bar Code
6-20