Chapter 6 RS-232 Interface

Introduction
This chapter provides instructions for progra mming the scanner to interfa ce with an RS-232 host interface. The
RS-232 interface is used to attach the scanner cradle to point-of-sale devices, host computers, or other devices
with an available RS-232 port (i.e., COM port).
If the particular host is not l isted in Table 6-2, set the communication p arameters to match the host device. Refer to
the documentation for the host device.
Throughout the bar code menus, default values are indicated with asterisks (*).
NOTE This scanner uses TTL RS-232 signal levels, which interface with most system architectures. For system
architectures requiring RS-232C signal levels, Motorola offers different cables providing the TTL to
RS-232C conversion. Contact Motorola Enterprise Mobility Support for more informa tion.
*Baud Rate 9600 Feature/Option
* Indicates Default