User Preferences 4 - 7
Trigger Mode
Scan one of the following bar codes to set the scanner’s trigger mode.
Level Trigger
Upon trigger pull, an aiming dot appears for a programmable duration of time. After this time, the aiming dot turns
into a st andard laser scanning be am for a full decode se ssion. The laser scanning be am st ays on u ntil the laser-on
timeout occurs, a decode occurs, or the trigger is released. If the trigger is released be fore the aiming duration
expires, the laser shuts off and no decode occurs.
*Level
Two Stage - Option 1
Upon trigger pull, an aiming dot appe ars. This aiming dot remains while the trigger is pulled. When the trigger is
released, the aiming dot turns into a standard laser scanning beam for a full decode session. The laser scanning
beam stays on until the laser-on timeout occur s or a deco de occurs. If the trigger is pulled ag ain while in a decode
session, the scanner beam returns to an aiming dot.
Two Stage - Option 1
Two Stage - Option 2
Upon trigger pull, an aiming dot appears. When the trigger is released, the aiming dot turns off. Pulling the trigger
twice quickly turns on the standa rd laser sca nni ng beam for a full decode session. The laser scanning beam stays
on until the laser-on timeout occurs, a decode occurs, or the trigger is released.
Two Stage - Option 2