4 - 12 Symbol LS3478 Product Reference Guide

Single Point/Multipoint Operation

The cradle supports communication from up to four scanners simultaneously. This multipoint mode requires an
external power supply to charge the scanners in the cradle. To power the cradle from the interface cable (either
from the USB hub or from a power supply att ached to the interface cab le), place the cra dle in single point mo de. In
single point mode, only one scanner can connect to the cradle at a time.
To select single point or multipoint mode, scan the appropriate bar code.
Multipoint Mode
*Single Point Mode

Unpair

Scan the following bar code to disco nnect the scanner from its cradle.
Unpairing
NOTE When operating in bus-powered mode, the cradle must turn off the Bluetooth radio to charge the scanner .
For this reason, only charge the scanner paired with the cradle in the cradle. Placing another scanner in
the cradle for charging disrupts communication with the paired scanner.
When setting options while in multipoint mode, allow time for the setting changes to apply to all scanners
NOTE The LS3478 Quick Start Guide also includes the unpairing bar code.