Connecting New Devices
Note: This feature requires an optional accessory.
To connect with a new device, you need to pair with it. You only need to do this once for each device – to connect again, just turn on the device.
1.Make sure the device you are pairing with is in discoverable mode.
Note: Refer to the guide that came with the device for details.
2.Touch 
> Settings > Wireless & networks > Bluetooth settings.
3.Touch Bluetooth to turn on and scan. If Bluetooth power is already on, touch Scan for devices.
4.Touch a device to connect.
5.If necessary, touch OK, or enter the device passkey
(like 0000) to connect to the device. When the device is connected, the Bluetooth indicator 
appears in the status bar.
.
Note: Using a mobile device or accessory while driving may cause distraction and may be illegal. Always obey the laws and drive safely.
The Bluetooth Enhanced Audio setting is not recommended for older Bluetooth headsets, as it may not deliver acceptable sound quality.
Reconnecting Devices
▶To automatically reconnect your phone with a paired device, simply turn on the device.
▶To manually reconnect your phone with a paired device, touch the device name in the Bluetooth devices list.
Disconnecting Devices
▶To automatically disconnect your phone from a paired device, simply turn off the device.
▶To manually disconnect your phone from a paired device, touch the device name in the devices list, and then touch 
> Disconnect.
Bluetooth
2I. Bluetooth & | 47 |
