Moxa Technologies 5110 Series user manual

NPort 5110 Series User’s Manual Initial IP Address Configuration

1.Connect NPort 5110’s serial port 1 directly to your computer’s male RS-232 serial port.

2.From the Windows desktop click on Start $ Programs $ PComm Lite $ Terminal Emulator.

3.When the PComm Terminal Emulator window opens, first click on the Port Manager menu item and select Open, or simply click on the Open icon.

4.The Property window opens automatically. From the Communication Parameter page, select the appropriate COM port for the connection, COM1 in this example, and 19200 for Baud Rate, 8 for Data Bits, None for Parity, and 1 for Stop Bits.

5.From the Property window’s Terminal page, select ANSI or VT100 for Terminal Type and then click OK. If you select Dumb Terminal as the terminal type, some of the console functions—especially the “Monitor” function—may not work properly.

6.Press the “ ` ” key continuously and then power on the NPort 5110.

7.NPort 5110 will receive the “ ` ” string continuously and then auto switch from data mode to console mode.

3-7