NPort 5110 Series User’s Manual | Web Console Configuration | ||||
|
|
|
|
| |
| 16 | AT&D | Serial port DTR control |
|
|
|
|
| AT&D0=recognize DTE always |
|
|
|
|
| ready |
|
|
|
|
| AT&D1, AT&D2=reply DTE when |
|
|
|
|
| DTR On (default) |
|
|
| 17 | AT&F | Restore manufacturer’s settings |
|
|
| 18 | AT&G | Select guard time | reply “OK” only |
|
| 19 | AT&R | Serial port RTS option command | reply “OK” only |
|
| 20 | AT&S | Serial port DSR control | reply “OK” only |
|
| 21 | AT&V | View settings |
|
|
| 22 | AT&W | Write current settings to flash for |
|
|
|
|
| next boot up |
|
|
S Registers
No. | S Register | Description & default value | Remarks |
1 | S0 | Ring to |
|
2 | S1 | Ring counter (always=0) | no action applied |
3 | S2 | Escape code character (default=43 ASCII |
|
|
| “+”) |
|
4 | S3 | Return character (default=13 ASCII) |
|
5 | S4 | Line feed character (default=10 ASCII) |
|
6 | S5 | Backspace character (default= 8 ASCII) |
|
7 | S6 | Wait time for dial tone (always=2, | no action applied |
|
| unit=sec) |
|
8 | S7 | Wait time for carrier (default=3, |
|
|
| unit=sec) |
|
9 | S8 | Pause time for dial delay (always=2, | no action applied |
|
| unit=sec) |
|
10 | S9 | Carrier detect response time | no action applied |
|
| (always=6, unit 1/10 sec) |
|
11 | S10 | Delay for hang up after carrier | no action applied |
|
| (always=14, unit 1/10 sec) |
|
12 | S11 | DTMF duration and spacing | no action applied |
|
| (always=100 ms) |
|
13 | S12 | Escape code guard time |
|
|
| (default=50, unit 1/50 sec) |
|
|
| to control the idle time for “+++” |
|
