Normal Speed Spectrum | High Speed Spectrum | |
| 50 (bps) | 400 (bps) |
75 | 600 | |
110 | 880 | |
134.5 | 1076 | |
150 | 1200 | |
300 | 2400 | |
600 | 4800 | |
1200 | 9600 | |
1800 | 14.4K | |
2400 | 19.2K | |
4800 | 38.4K | |
7200 | 57.6K | |
9600 | 76.8K | |
| 19.2K | 153.6K |
| 38.4K | 307.2K |
| 57.6K | 460.8K |
| 115.2K | 921.6K |
INT Vector Enter the interrupt vector I/O address for all ports. I/O address for interrupt vector is from 00000H to 0FFFFH. Interrupt vector is one byte of I/O address, in which each bit is used to indicate the occurrence of interrupt for corresponding port. To use interrupt vector, type in the hardware Interrupt vector I/O address. If not using interrupt vector, type 0 or leave blank as the interrupt vector.
There are two modes for the Smartio C168 Series driver. One is using interrupt vector, the other is not using interrupt vector. Driver employing interrupt vector scheme is supposed to have better performance than employing polling scheme.
5.Press F10 to save the configuration and exit the utility.
