Moxa Technologies C168HS Software Installation Basic Configuration, Non-Modem and Modem Baud Rate

Software Installation

Basic Configuration

In the [Basic configuration] dialog, users can set base I/O address and interrupt, which should be the same as the hardware configuration of the boards. Kernel rebuilding is required if any setting is changed.

In [getty Setting] sub-dialog, there is one noticeable field:

Non-Modem and Modem Baud Rate

This field stands for the initial baud rate symbol and hunt sequence for Non-Modem /Modem tty. It is simply for setting parameters of getty entries in system file /etc/inittab which could also be manually modified by system administrator. Its value comes from the UNIX system “getty default” file, i.e., “/etc/gettydefs”. Modify this field to suit your need.

In some cases, you may need to modify the “getty default” file as well. For example, in some UNIX systems, the “9600” symbol indicated 8-data-bit no-parity while in

Smartio C168H/HS User’s Manual 3-29