Chapter 3. Installation and Maintenance

8.Repeat step 7 to secure a shelf retainer bracket to the right shelf support.

9.Place the Controller Shelf on the cabinet shelf supports and slide the shelf completely to the rear of the cabinet.

10.Install two shelf retainer brackets (item 1, Figure 3–5) to the left and right rails of the cabinet and secure with two screws. The Controller Shelf is now safely mounted in the cabinet.

Figure 3–5 RETMA Cabinet Shelf Supports

3.2.2Installing UPS Brackets

The shelf brackets that support and secure the UPS in the cabinet are a custom design. The following procedure describes how to install the rack-mount brack- ets. It applies to both cabinet designs – RETMA and metric. You will need the following items to properly install the UPS brackets in your style cabinet:

2 UPS rack-mount brackets (74-53154-01 and -02)

1 Bag (Table 3–3 lists contents) of mounting hardware (99-06557-05)

Phillips-head screwdriver

EK–SMCPQ–UG. C01

3–9

Page 60
Image 60
Compaq 3000 manual Installing UPS Brackets, Retma Cabinet Shelf Supports