RAID Array 3000 Controller Shelf

3.5Controller LEDs

The LEDs on the front panel of the controller monitor host and disk channel ac- tivity and a controller fault condition. The reset button/LED flashes green ap- proximately once every second (heartbeat) to indicate that the controller is oper- ating normally. Figure 2–3, Chapter 2, identifies the LEDs. Table 2–1 describes their functions.

3.6Replacing Components (FRU’s)

This section describes how to replace an FRU in the RAID Array 3000 controller shelf. The information is divided into the following subsections:

Replacing a Host I/O or Device I/O SBB in the controller shelf

Replacing a shelf power supply SBB

Replacing the RAID controller

Replacing the UPS

Replacing a blower

Replacing a controller memory cache module

NOTE

The rack-mount UPS is also field replaceable. Re- fer to the user’s guide supplied with the unit for the order number and instructions of how to replace it.

Figure 3–15 is an exploded view that shows the Field Replaceable Units in the controller shelf. Table 3–4 lists the units and their corresponding part numbers.

3–28

EK–SMCPQ–UG. C01

Page 79
Image 79
Compaq 3000 manual Controller LEDs, Replacing Components FRU’s