RAID Array 3000 Storage Subsystem

4.2Installing the Upgrade

CAUTION

To prevent an electrical discharge from damaging the SIMMs, always wear an ESD wrist or foot strap con- nected to a suitable ground when handling the memory modules.

NOTE

You can upgrade your firmware using the SCSI or net- work connection methods. These methods provide the fastest way to upgrade your firmware. To update your controller’s firmware, proceed as follows.

4.2.1Save Existing Configuration

NOTE

You must save the subsystem configuration using the StorageWorks Command Console Client (SWCC) be- fore performing the installation procedure. Otherwise, the RAID controller may lose your configuration.

To save your current configuration:

Select the Storage pull-down menu from the Toolbar (see Figure 4-1), click on Con- troller, select Configuration, and then Save.

4-2

EK–SMCPQ–UG. C01

Page 91
Image 91
Compaq 3000 manual Installing the Upgrade, Save Existing Configuration