Chapter 4. Second Controller Option

4.2.4Install Two SIMMs into Second Controller

1.Install two of the SIMM modules into the second controller (make sure all SIMM modules are of the same type) by aligning the connector pins and inserting the modules into the SIMM module connectors as shown in Figure 4-5.

Figure 4-5. Insert Module into SIMM Connector

2.Ensure the module is firmly seated and then gently pivot it toward the controller board until it snaps into place as shown in Figure 4-6.

Figure 4-6. Pivot Module Down to Seat

EK–SMCPQ–UG. C01

4-7

Page 96
Image 96
Compaq 3000 manual Install Two SIMMs into Second Controller, Insert Module into Simm Connector