Software Installation
If something went wrong, for instance, the board does not match the configuration or the board is missing, the screen will show a message like:
Universal 2/4/8 serial ports Communication Driver
Setup driver …
None serial port found!!
It means the Smartio C168 Series driver is not installed properly. Please refer to chapter, “Troubleshooting”, for possible reasons and solutions.
Unloading Driver
To unload (release) the Smartio C168 Series driver from memory, type “SER- DRV/Q” at the DOS prompt
UNIX
There are various UNIX operating systems, such as SCO UNIX, UNIX SVR4.2, XENIX and Solaris, etc. Different types of UNIX drivers are required for different UNIX. Moxa supports device drivers currently for SCO UNIX/OpenServer and
UNIX SVR4.2 .
In this section, driver installation procedure is described. Administration utility, moxaadm, is explained, which is for configuration, monitor and terminal emulation. Related issues such as device naming, baud rate settings and terminal enable are stated.
If you are interested in UNIX serial programming, extended Ioctl() commands are provided in Chapter “Serial Programming Tools” for advanced programming.
Smartio C168H/HS User’s Manual
