by time interval.
Administrators can use combinations of options on the application web page to perform various useful security applications. Although most settings will be done automatically by the Application Wizard, administrators can also make adjustments to the settings from this page.
To set up the 4 applications that VPort 2140 Video Server provides, administrators must have a certain level of knowledge about the setting items listed in the Application web page. Below is the table that separates the setting items into 4 levels.
Level 1 | Level 2 | Level 3 |
| Level 4 |
□Weekly schedule |
| □Sun □Mon □Tue □Wed □Thu □Fri □Sat | ||
| snapshots begin at [hh:mm:ss] | |||
□All the time except |
| snapshots stop at [hh:mm:ss] | ||
□Enable the external script file to ignore the following settings | ||||
for the above schedule |
|
|
| |
□Event operation | □Show alert in image | |||
|
| Trigger |
| Motion Detected on: |
|
| condition |
| □Video 1 □Video 2 □Video 3 □Video 4 |
|
|
|
| DI condition: |
|
|
|
| DI 1: Disable, High, Low, Rising, Falling |
|
|
|
| DI 2: Disable, High, Low, Rising, Falling |
|
|
|
| DI 3: Disable, High, Low, Rising, Falling |
|
|
|
| DI 4: Disable, High, Low, Rising, Falling |
|
| Trigger action |
| Delay □ second(s) to trigger output alarm |
|
| □ Send |
|
|
|
|
| DO condition: | |
|
| snapshot while |
| DO 1: Disable, Open, Close |
|
| trigger |
| DO 2: Disable, Open, Close |
|
| condition(s) |
| Snapshot on: |
|
| match |
| □Video 1 □Video 2 □Video 3 □Video 4 |
|
|
|
| Take □ snapshot(s) with □ tenth seconds |
|
|
|
| interval after the event |
| □Sequential mode |
|
| Snapshot every □ tenth seconds |
| □Send snapshot by email |
|
| |
| □Send snapshot by | □FTP put snapshots with date and time suffix | ||
| FTP |
|
|
|
Weekly schedule
The Weekly schedule is provided for daily security applications. Administrators can select any weekday from Monday to Friday with the daily schedule set from 08:00 am to 20:00 pm when no one is available to perform event checking. If the security system is installed in an office for which no one is present on nights or weekends, administrators can still set the time period as above, from 08:00 am to 20:00 pm, but remember to select All the time except for the above schedule to let the program run during nights and weekends.
Either “Weekly schedule” or “All the time except for the above schedule” must be selected, or the applications described in the following sections will not work properly.
