Powering on the VPort 2140 Video Server
First, make sure that all cables are correctly and firmly connected, and then turn on the cameras, sensors, and alarm devices.
Next, power on the video server by attaching the Video Server’s power adaptor to an electrical outlet. After the POST
Assigning an IP Address to VPort 2140 Video Server
Using the IP Installer Program
1.Power on the VPort after running IPinstaller.exe.
2.Wait for
3.Click on the VPort whose MAC address matches the one you just installed to assign it an IP address.
4.To assign an IP address to this VPort, manually type in the IP address you want to use if it differs from the IP address given by the DHCP server.
5.Check Use the IP whenever system boots option if you wish to continue using this IP
