What is the default stage delay timer setting?

The default stage delay timer setting is 20 minutes.

What is the maximum heat setpoint range?

The maximum heat setpoint range is 40 to 90°F.

Parameter Name:	Default	Parameter Value Setting	Increment	Installer entry

System (Go to equipment button and scroll to System) NOTE − All of the following changes are made on the stat.

Equipment Name		(keyboard input screen)

Filter 1 Timer Selection	Calendar Time	Calendar Time, Run Time

Filter 2 Timer Selection	Calendar Time	Calendar Time, Run Time

UV Bulb Timer Selection	Calendar Time	Calendar Time, Run Time

Humidifier Pad Timer Selection	Calendar Time	Calendar Time, Run Time

PureAirt Timer Selection	Calendar Time	Calendar Time, Run Time

Smooth Setback Recovery	Enabled	Enabled, Disabled

Auto Changeover − Temp Deadband	5ºF	3 to 9ºF	1ºF

Electric Heat Control Mode	Standard	Standard, Even Heat

Gas Heat Control Mode: (SLP98, G71MPP)	Load Tracking	Load Tracking Variable Capacity, Variable Capacity, Staged

(SL280, EL296)	Staged	Staged only

Max Heat Setpoint	90ºF	40 to 90ºF	1ºF

Min Cool Setpoint	60ºF	60 to 99ºF	1ºF

Heat Cool Stages Locked In	Disabled	Enabled, Disabled

*1st Stage Differential	1.0ºF	0.5 to 3ºF	0.5ºF

*2nd Stage Differential	1.0ºF	0.5 to 8ºF	0.5ºF

*3rd Stage Differential	0.5ºF	0.5 to 8ºF	0.5ºF

*4th Stage Differential	0.5ºF	0.5 to 8ºF	0.5ºF

*5th Stage Differential	0.5ºF	0.5 to 8ºF	0.5ºF

*6th Stage Differential	0.5ºF	0.5 to 8ºF	0.5ºF

Stage Delay Timers	Enabled	Enabled, Disabled

*2nd Stage Delay	20 Minutes	5 to 120 Minutes	5 Min

*3rd Stage Delay	20 Minutes	5 to 120 Minutes	5 Min

*4th Stage Delay	20 Minutes	5 to 120 Minutes	5 Min

*5th Stage Delay	20 Minutes	5 to 120 Minutes	5 Min

*6th Stage Delay	20 Minutes	5 to 120 Minutes	5 Min

*Number of stages shown in thermostat is dependent on equipment that is installed. Electric heat will bring on 2 elements at a time if available.

table continued on next page

Page 37

icomfort Wi-Fit 7−Day Programmable Communicating Thermostat