Lennox International Inc XP2101, XC2105 Secure Connection Recommended, Start, Here, Wi−Fi setup

Enable the thermostat’s Wi-Fi feature from the Home screen
network security key or passphrase			press any line to edit it				Secure Connection Recommended!
displays information here as keys pressed		network name (SSID)		5.2		none	Make sure the router is capable of, and set to operate in
	6	press here to enter network name			security	WEP	wireless network
					is WPA2		contact service provider for help. A secure wireless net-
		password			5.2	WPA	work is recommended over an open (unsecured) network.
					a		You will need the homeowner’s approval and router pass-
	6		press here to enter Wi−Fi AP (router) password			WPA2	word to enable Wi−Fi in a secured connection.
			7 END	connect			Enable Wi−Fi To enable the Wi−Fi feature to com-
							municate with a wireless router:
			type the network security key or passphrase for				1.	Press and release
								the HOME screen (see START HERE). The screen
			(locked Wi−Fi Access Point [AP])
								changes from the Home Screen to the WI−FI SET-
	6 press here to enter Wi−Fi AP (router) password
								TINGS screen.
WI−FI SETTINGS			7 END	connect			2.	Press the Wi−Fi enable button.
							3. Press next as necessary; then press accept after
			NETWORK					reading the User Agreement.
Wi−Fi					5.1		4.	Press NETWORK SETTINGS; this screen shows a
disable								graphical view of buttons representing Wi−Fi options
7 END
			5.0				5.2	OPEN and SECURE wireless networks and a button
			5.0 UNSECU-					for creating a new access point (AP).
			RED ACCESS	5.1 SECURE
							5.	Decide which of the following buttons you need to
			POINT
				Access Points
								select:
				5?
								5.0 Wi−Fi Port (no password required).
				5.2 CREATE NEW AP
								5.1
								5.2
1				User Agreement				5.2a creating a	new AP, you have the option
	WI−FI SETTINGS							of selecting a security level (default is none; choose
START				next...				from WEP, WPA, WPA2, depending on the security
HERE	4			next...				defined in the homeowner’s router); the password
Wi−Fi				3				field appears.
							6. When you touch in one of the input fields (press here
	NETWORK		Wi−Fi	accept	decline
								to enter...), the keyboard tool appears. Enter pass-
	SETTINGS		enable
1			2					word (if simply logging into an existing network) or
								enter the network name if creating a new AP. If you
								mistype the password or if you cannot access the
								selected network, a message will alert you to retry.
							7. Press connect to complete the connection. Note
								that
			Figure 27. Wi−Fi setup					screen changes to

506920−01 09/12 Page 24