Registering the icomfort Wi-Fit thermostat
From NETWORK SETTINGS screen, you can change to the desired net- work as shown in figure 28. Enter security key or passphrase.
WI−FI SETTINGS screen.
NOTE NETWORK’s marked with * - Selecting one of these wireless networks may result in an unreliable connection to your thermostat. Press help
strength.
choose a wireless network
NETGEAR | NETWKB | NETWKC | NETWKD * | (returns to | |
WI−FI SETTINGS | |||||
|
|
|
| ||
|
|
|
| screen) |
| type the network security key or passphrase for |
| NETGEAR |
| add new |
| network |
| AP Info |
Wi−Fi | dis− |
connect | |
9:39 am Aug 15, 2012 |
Figure 28. Change Networks
Registration for online access
From the WI−FI SETTINGS screen, press the thermostat not registered" button (see figure 29).
Enter homeowner email address twice and press the register button.
A pop up screen then appears to notify the user to check their home comput- er for instructions to complete the registration. After the server sends the email with the network link, registration and account creation must be com- pleted on the homeowner’s personal computer (see Page 26).
NOTE − Time from pushing the registration button on the thermostat and re- ceiving the consumer portal register link from your email on your computer is from 5 to 15 minutes.
After registration has been completed, any available firmware downloads will immediately start downloading to the thermostat.
REGISTRATION |
|
|
|
| Register with iComfort thermostat to enable remote access and | ||
|
| online weather information |
|
enter your email |
|
|
|
re−enter your email |
|
|
|
System Desc |
|
|
|
|
| register |
|
WI−FI SETTINGS | 15, 2012 |
|
|
|
|
| (returns to |
|
|
| HOME |
|
|
| screen) |
|
| thermostat | Firmware |
| Wi−Fi | not | update |
connected | enabled | registered | auto |
press to | press to enable | press to change | press to toggle firm- |
change network | / disable Wi−Fi | thermostat regis- | ware update between |
settings |
| tration |
|
NOTE −
If any downloads are availableConnection toforserverthehasthermostatnot bee es ablishedthey willor itstarthas beendownloadinglost. Please right away. When new firmware is beingwait untildownloadedco nection is orestablishedwhen. Gelaskins are
being installed, the thermostat screen will temporarily go blank and running Wi−Fi 9:39 am Aug 15, 2012
units may cease operation while the system is being reset to accommodate the new changes. This is normal and can last a couple minutes.
Figure 29. Registering the system for online access
For any issues with Wi−Fi connections, refer to Wi−Fi Troubleshooting Checklist 507037−01.
Page 25 | icomfort |
