Lennox International Inc SLP9801, XP2101, XC2105, XC1702, XP1906, XP1702, G71MPP03, SL28003, CBX32MV06

Adjust a setting... Configure Dehumidification (no dehumidifying device installed) (skip if default

System Devices

System

Furnace

To adjust a setting, highlight it, then press Edit

System

Pre−adjustment REQUIREMENTS:

1st, NO physical dehumidification device has been installed. 2nd, configure the thermostat for dehumidification as follows:

1. In the	1a) to highlight System.
Press edit (1b).

Thermostat

1a

about

2. In the 2a) to highlight Dehumidification

2 Stage AC Unit

Power (120VAC) Humidifier

1b

edit

Control Mode. The current value defaults to Display Only. Press edit

(2b).

3.Touch one of the radio buttons (3a) to select the mode of dehumidification control; press save (3b).

				reinstall	4. Use arrows (4a) to highlight any red colored text in the list (e.g. select Min
System		Dehumidification Control Mode				Dehumidification Setpoint). Press edit (4b).
2nd Stage Differential					5. Use arrows (5a) to make changes; press save (5b). Change other red
			back	next		settings (e.g. Auto Changeover − Humidif. Deadband) using a similar
Staged Delay Timers
		current value:				process.
2nd Stage Delay	2a	Display Only		2b	6. Press the back button to return to
Dehumidification Control Mode					NOTE − If the defaults are correct, you do not have to make any changes, but you
Humidification Control Mode				edit	must press save (5b). When all red text is gone, the back button will appear; press it
OK/Humid Boundary					to return to the
Outdoor Temperature Reading				reset		Dehumidification Control Mode
			System
Dehumidification Control Mode			Staged Delay Timers
Select one						current value:
			Balanceb ck Point Control
Display Only	Basic					Precision
			Dehumidification Control Mode				Min Dehumidification Setpoint
Precision 3a						4b		Range is 40 to 60
			Humidification Control Mode		4a
								Default is 45, inc:1
			Auto Changeover − Humidif. Deadband			edit
								set−to
			Max Humidification Setpoint			please view and save all
						red settings
			Min Dehumidification Setpoint					45
						reset			5a
			OK/Humid Boundary
						6
			Outdoor Temperature Reading					save	cancel
save	cancel						5b
						back
3b

9:39 am Aug 15, 2012

Figure 16. Adjust dehumidification when not using Humiditrol or an auxiliary dehumidifier

Page 17 icomfort Wi-Fit 7−Day Programmable Communicating Thermostat