MRV Communications AE182FCAKA, AE212FCAKA, AE09~212FCAKA, AE092FCAKA, AE072FCAKA Recommendations

Operating Instructions AUTO RUN, COOL,HEAT and DRY operation

Recommendations

Use COOL in summer.

Use HEAT in winter.

Use DRY in spring,autumn and in damp climate.

		MODE FAN	SWING
AUTO	2	TEMP	HEALTH
			4
		CLOCK3	SET
SET		TIMER	SLEEP
AM		FILTER RESET RESET

5

ON/OFF

1

T E M P
ON
OFF
SWING	FAN
5
MODE	SLEEP
HEALTH FRESH
CLOCK	SET
TIMER

RESET LIGHT LOCK

(1) Unit start

Press ON/OFF button, unit starts.

Previous operation status appears on display (Not Timer setting). Power indicator lights up.

(2) Select operation mode

Press MODE button. For each press, operation mode changes as follows:

Press FAN button. For each press, fan speed changes as follows:

Wire controller

LOW MID HIGH

Remote controller

LOW MID HIGH

AUTO

AUTO

A

U

T

O

AUTO

AUTO COOL DRY HEAT FAN

Unit will run in operation mode displayed on LCD. Stop display at your desired mode.

(3) Select temp. setting

Press TEMP button

Every time the button is pressed, temp. setting increases 1 C.

If button is kept depressed, temp.setting will increase quickly.

Every time the button is pressed, temp. setting decreases 1C.

If button is kept depressed, temp. setting will decrease quickly.

Unit will start running to reach the temp. setting on LCD.

Unit runs at the speed displayed on LCD.In HEAT mode, warm air will blow out after a short period of time due to cold-draft prevention function.

In DRY mode, when room temp. becomes 2 C higher than temp. setting, unit will run intermittently at LOW speed regardless of FAN setting.

(5) Unit stop

Press ON/OFF button.

Only time and room temp remains on LCD. All indicators go out.

Vertical flap closes automatically.

Hints

Wire controller can memorize each operation status. When starting it next time, just press ON/OFF button and unit will run in previous status.

(4) Fan speed selection

Auto running: During the Auto running mode, air conditioning running and can auto-select the cooling, heating, fan mode according to the room temperature.

Fan running: The AC only have air supply running no cooling and heating running at the condition, AC can't have auto air supply running, and can't display the setting temperature value on the LCD.

During the heating running, after start the AC, in order to prevent cooled air, AC can stop for a while before send heat air.

During the dehumification running, when the room temp. setting temp. , not setting condition according to the air speed.

1 2