Realtek Audio
Hardware Setup
Installing the Card
The interface of this Audio Card is PCIE x1. And you can install it to the PCIE x1 (PCI_E1) slot only.
Follow the steps below to install the audio card, then you can activate the advanced function and enjoy the audio effect.
1.Turn off your computer and disconnect the power cord.
2.Open and remove the case of the computer.
3.Find the PCIE x1 (PCI_E1) slot. Only the PCIE
x1 slot supports installing the audio card.
4.Remove the bracket which may obstruct the installed PCIE x1 slot.
5.Gently but firmly install the Audio Card to the PCIE x1 slot and secure the card bracket with a screw.
6.Replace and secure the case. Reconnect the power cord to the computer.
