MS-7666
Important
Failed Overclocking Resolution
This mainboard supports overclocking greatly. However, please make sure your pe- ripherals and components are bearable for some special settings. Any operation that exceeds product specification is not recommended. Any risk or damge resulting from improper operation will not be under our product warranty.
Two ways to save your system from failed overclocking...
•Reboot
Press the Power button to reboot the system three times. Please note that, to avoid electric current to affect other devices or components, we suggest an interval of more than 10 seconds among the reboot actions.
At the fourth reboot, BIOS will determine that the previous overclocking is failed and restore the default settings automatically. Please press any key to boot the system normally when the following message appears on screen.
Warning !!! The previous overclocking had failed, and system will restore its defaults setting, Press any key to continue.......
•Clear CMOS
Please refer to “Chapter 2” for more information about how to clear CMOS data.
