MSI Big Bang-XPower manual Check the box

MS-7666

2.After the hardware installation is completed, restart the system and install the NV SLI driver/utility. A configuration panel will be provided for Multi-GPU control. Check the Enable multi-GPU box to enable the SLI function for the onboard graphics cards (concerning the details of multi-GPU settings, please refer to your graphics card manual).

Chapter 2

Check the box

3.Restart your system and a pop-up message will show in the system tray confirming the Multi-GPU has been enabled.

Important

If you want to remove one graphics card and quit the SLI function, make sure the “Mul- tiGPU” function is disabled.

2-29