![](/images/new-backgrounds/1241385/24138543x1.webp)
Hardware Setup
5.Visually inspect if the CPU is seated well into the socket. If not, take out the CPU with pure vertical motion and reinstall.
6.Engage the load lever while pressing down lightly onto the load plate.
Alignment Key
7.Secure the lever near the hook end under the retention tab.
8.Make sure the four hooks are in por- per position before you install the cooler.
Important
•Confirm if your CPU cooler is firmly installed before turning on your system.
•Do not touch the CPU socket pins to avoid damaging.