![](/images/new-backgrounds/1241385/241385193x1.webp)
4.In the “Hard Disk Disk List” menu, use <Space> key to select the disks you want to create for the RAID set, then click <Enter> key to finish selection.
5.Then select the block value (stripe value) for the RAID array by using the “upper arrow” or “down arrow” keys to scroll through the available values, and pressing the <Enter> key to select and advance to the next field. The available values range from 4KB to 128 KB. The default and typical value for RAID 0 is 128KB. (This field only available for RAID 0 mode.)