▶Legacy USB Support
Select [Enabled] if you need to use a
▶Onboard USB 3.0 Controller
This item allows you to enable/ disable the USB 3.0 controller.
▶USB 3.0 Support
This item allows you to enable/ disable the USB 3.0 support. ▶Super IO Configuration
Press <Enter> to enter the
▶Serial
Port 0 Configuration
Press <Enter> to enter the
▶Serial
Port
This item allows you to enable/ disable the serial port.
▶Change Settings
Select an address and corresponding interrupt for the serial port. ▶H/W Monitor
Press <Enter> to enter the
▶CPU Smart Fan
Target
The Smart Fan function controls the CPU fan speed automatically depending on the current temperature to keep it with in a specific range. You can enable a fan target value here. If the current CPU fan temperature reaches to the target value, the smart fan function will be activated.
▶CPU Min.Fan Speed(%)
This item allows users to select how percentage of minimum speed limit for the CPU fan.
▶SYS Fan 1/ 2 Control
These items allow users to select how percentage of speed for the SYSFAN1/ 2.
