Multiquip SGW-250SS -TRAILERSAFETY GUIDELINES, Tires/Wheels/Lug Nuts, Tire Wear/Inflation

Models: SGW-250SS

1 92
Download 92 pages 45.39 Kb
Page 16
Image 16
SGW-250SS —TRAILER SAFETY GUIDELINES

SGW-250SS —TRAILER SAFETY GUIDELINES

Tires/Wheels/Lug Nuts

Tires and wheels are a very important and critical components of the trailer. When specifying or replacing the trailer wheels it is important the wheels, tires, and axle are properly matched.

CAUTION:

DO NOT attempt to repair or modify a wheel. DO NOT install in inner tube to correct a leak through the rim. If the rim is cracked,

the air pressure in the inner tube may cause pieces

of the rim to explode (break off) with great force and cause serious eye or bodily injury.

Tire Wear/Inflation

Tire inflation pressure is the most important factor in tire life. Pressure should be checked cold before operation DO NOT bleed air from tires when they are hot. Check inflation pressure weekly during use to insure the maximum tire life and tread wear.

Table 3 (Tire Wear Troubleshooting) will help pinpoint the causes and solutions of tire wear problems.

CAUTION:

Suspension

The leaf suspension springs and associated components (Figure 2) should be visually inspected every 6,000 miles for signs of excessive wear, elongation of bolt holes, and loosening of fasteners. Replace all damaged parts (suspension) immediately. Torqued suspension components as detailed in Table 4.

Figure 2. Major Suspension Components

NOTE

ALWAYS wear safety glasses when removing or installing force fitted parts. Failure to comply may result in serious injury.

PAGE 16 — SGW-250SS DC WELDER/AC GENERATOR— PARTS & OPERATION MANUAL — REV. #2 (08/08/01)

Page 16
Image 16
Multiquip operation manual SGW-250SS -TRAILERSAFETY GUIDELINES, Tires/Wheels/Lug Nuts, Tire Wear/Inflation, Suspension