SGW-250SS — CONTROLS AND INDICATORS
16.Positive Welding Output Terminal – Connect the welding cable to this terminal. Select the appropriate polarities according to the application. See Table 7.
17.Negative Welding Output Terminal – Connect the negative cable of the welding source to this terminal. Select the appropriate polarities according to the application. See Table 7.
18.Receptacle G.F.C.I. – This receptacle provides 120 volts and output @ 20 amps.
19.Circuit Protector Circuit Breaker – This single pole circuit breaker provides circuit protection (250V @20 amps) for the G.F.C.I receptacle.
20.Receptacle – Provides 120 volts output @ 25 amps.
21.Receptacle – Provides 120/240 volts output @ 25 amps.
22.G.F.C.I GroundTerminal – Use this terminal to connect external equipment grounds so the G.F.C.I. receptacle will have a ground path.
27
23.Frame Ground Lug – Connect a ground strap between this lug and a ground rod. Make sure the ground rod is inserted deep into the ground to provide a good earth ground. Consult with local Electrical and Safety Codes for proper connection.
24.Fuel Tank – Holds 10 gallons (38 liters) of unleaded fuel.
25.Fuel Gauge – Indicates the amount of fuel in the fuel tank.
26.Choke Knob – Used in the starting of a cold engine, or in cold weather conditions. The choke enriches the fuel mixture for starting a cold engine.
27.Lifting Hook – Use this hook to lift the generator.
28.Engine Oil Dipstick – Indicates engine oil level, add oil as required. See Table 3 for correct type of oil.
29.Oil Drain Plug – Remove this plug to drain oil from the engine.
30.Fuel drain Plug – Remove this plug to drain fuel from the fuel tank.
|
|
| ON | WHISPERWELD |
|
|
| ||
|
|
| OFF |
|
|
|
| ||
|
|
| POWERED by |
|
|
|
|
| |
|
|
|
| POWERED by |
|
|
|
|
|
|
|
| IDLE CONTROL HONDA |
| QUARTZ |
|
|
| |
|
|
|
| AC CIRCUIT |
|
|
|
|
|
|
|
|
| BREAKER | HOUR |
|
|
| |
|
|
|
|
|
| ON METER |
|
|
|
|
|
|
|
|
| OFF |
|
|
|
|
|
|
|
|
| OPERATION |
|
|
|
|
|
|
|
|
| SWITCH |
|
|
|
|
|
|
| MQ |
|
|
|
|
|
|
|
|
| POWER |
| START |
|
|
|
|
|
|
|
|
| BUTTON |
|
|
|
|
|
|
|
|
|
|
|
| . |
|
|
|
|
|
|
|
| Source | Professionals |
|
|
|
|
|
|
| Power |
| |
|
|
|
|
|
|
|
|
| |
16 |
| MQ |
|
|
|
|
|
| |
|
|
|
|
|
|
|
| ||
| 18 |
| POWER |
| 22 | ||||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| |
17 |
| 19 | 20 | 21 |
|
|
|
| |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| 23 |
24
FRONT VIEW
MQ POWER 26
WHISPER WELD
25
MQ POWER |
|
|
28 |
|
|
|
| . |
| Source | Professionals |
Power |
| |
|
| |
HC |
|
|
30
29