CAUTION:
This generator is a source of providing LETHAL high voltages. Never permit unqualified
■Always refuel in a
area, away from sparks and open flames.
■This generator is equipped with a ground terminal for your protection. Always complete the grounding path from the generator to an external grounding source.
■NEVER operate this generator, or handle any electrical equipment while standing in water, while bare foot, while hands are wet, or in the rain. Dangerous electrical shock could occur causing severe bodily harm or even death.
■Keep electrical cords in good condition.Worn, bare or frayed wiring can cause electrical shock, thus causing bodily harm or even death.
■This generator requires an adequate free flow of cooling air. Never operate the generator in any enclosed or narrow area where free flow of the air is restricted. If the air flow is restricted it will cause serious damage to the generator and may cause injury to people.
■NEVER touch the hot exhaust manifold, muffler or cylinder. Allow these parts to cool before servicing generator.
RULES FOR SAFE OPERATION
■Provide adequate ventilation when operating the generator. DO NOT operate the generator in any enclosed or narrow space. The gasoline engine that provides power to the generator gives off DEADLY monoxide gas.
■Always make sure the welder/ generator is secure on level ground so that it cannot slide or shift around, endangering workers. Also keep the immediate area free of bystanders.
■HighTemperatures – Allow the machine and engine to cool before adding fuel or performing service and maintenance functions. Contact with hot components can cause serious burns.
CAUTION:
Emergencies
Always know the location of the nearest fire extinguisher and first aid kit. Know the location of the nearest telephone. Also know the phone numbers of the nearest ambulance, doctor and fire department.
Maintenance Safety
■NEVER lubricate components or attempt service on a running machine.
■Always allow the machine a proper amount of time to cool before servicing.
■Keep the machinery in proper running condition.
■Fix damage to the machine immediately and always replace broken parts.
■Dispose of hazardous waste properly. Examples of potentially hazardous waste are used motor oil, coolant, fuel and fuel filters.
■DO NOT use plastic containers to dispose of hazardous waste.
■DO NOT pour waste, oil, coolant, or fuel directly onto the ground, down a drain or into any water source.
