Night Light

The night light can be used on either side of the saw, and can be extended and rotated for best illumination of the cutting area. Aim the light, then lock it in position by tightening the lock knobs. The light can be removed for storage by loosening the lock knobs, disconnecting the light cord and sliding the light bar out of the saw.

 

Lock

Lock

Knob

 

Knob

 

Fig. 20 — Night Light (Similar to illustration)

Transportation Tie-downs and Lift Point

Tie-downs

The saw is provided with holes at each corner of the lower frame for easy tie- down during transportation. The ½” all-thread J-bolts, with which your saw was attached to its shipping pallet, can be used in a variety of tie-down scenarios. It is highly recommended that the saw be tied down any time it is being transported.

Tie-down

Tie-down

Fig. 21 —Tie-down Points

39

Page 39
Image 39
Multiquip Sp-6065 operation manual Night Light, Transportation Tie-downs and Lift Point