The drive wheels are aligned by adjusting the entire rear drive assembly:

1.Loosen the Transaxle Attachment Bolts just enough to move the Transaxle

do not completely loosen the bolts.

2.Loosen and tighten the Alignment Jackscrew nuts to move the Transaxle

and thus the wheels — in the appropriate direction to achieve the desired alignment distance (see Fig.44).

3.Lock down the Transaxle Attachment Bolts when the appropriate alignment distance is set.

Pivot Side

Adjustment Side

Alignment

Jackscrew

Pivot Side Attachment Bolts

Adjustment Side Attachment Bolts

Fig. 46 — Drive Wheel Alignment Bolt Locations

63

Page 63
Image 63
Multiquip Sp-6065 operation manual Pivot Side Adjustment Side