NCR RealScan 7882 Installation and Owner Guide
3.Install two Latch Clips – horizontal installation only. These clips secure the RealScan 7882 to the Plastic Top Plate in case something falls on the assembled unit.
Plastic Top Plate
ScannerC
Latch Clip
Mounting Screw
18749
4.Connect Power Cable and Interface Cable.
Power Cable
Interface Cable
19769
•Connect the Power Cable – right angle connector. Be sure the connector is positioned against the plastic extension on the Top Plate.
•Carefully push the plastic extension away from the RealScan 7882 as shown in the illustration.
•Connect the Interface Cable – push it down until it latches.
24 of 62 | 09/02 |
