NCR 7882 manual Operating the Scanner, Horizontal Mount In Counter, Table Top Mount

NCR RealScan 7882 Installation and Owner Guide

Operating the Scanner

The NCR RealScan 7882 is a fixed position device that is not handled or moved by the operator during operation. It is maintained and serviced by trained service personnel only. The operator has no access to any laser module components.

The RealScan 7882 does not have a power switch. However, you turn it on and off by using the circuit breaker switch, located in the checkstand, that supplies power to the unit. Be sure this switch is in the On position.

The Red Indicator is on when the RealScan 7882 is ready. When the scanner reads a bar code, the Red Indicator turns off and the Green Indicator turns on. Nothing happens if the bar code is not read. The correct way to do pass-by scanning is to just slide the item past the scan window without lifting the item. With presentation scanning, you lift the item, move it straight toward the scan window, then bring the item back away from the scanner.

Motion Detector	Red/Green Status Indicator
	Item Flow

Horizontal Mount In Counter

Scan Window

Table Top Mount Vertical Mount

11959

497-0419630 Release F 09/02 27 of 62