Chapter 4 Functions of ReplicationControl
115
-ad option: Displays information only associated with a specified drive name or a path name of
the NTFS folder.
-ap option: Displays information only associated with specified logical disk numbers.
-av option: Displays information only associated with specified mount point volume names.
-ah option: Displays information only associated with specified HBT. If LUN is also specified,
the system displays information only associated with specified HBT and LUN.
-ctl option: Lists the physical disk numbers and logical disk numbers of control volumes and the
corresponding disk array names.
-p option: Displays the version information and the date when the volume list is created as the
property information of the volume list.
-ax option: Lists disk array information, correspondence of all logical disks, and the property
information of the volume list.
[Displayed Information]
(i) When the -cr option is specified:
When the volume list is created or updated successfully, the following message appears.
iSM11700: Please wait a minute.
iSM11701: Volume list is created successfully.
(ii) When the -d option is specified:
Disk array information as shown below is listed.
--- Disk Array List ---
Disk Array Name Number of Drives
disk_array_name number
Description
disk_array_name: Disk array name
number: Number of logical disk information (volume information) items for each disk
array registered in the volume list