Chapter 4 Functions of ReplicationControl
154
Description
The execution message and the end message appear only when -wait has been specified to wait for
the Synchronous State (rst/sync).
If you do not want the execution message to appear, change the RPL_WAITMSG setting in the
replication operation option setting file. For information about the replication operation option
setting file, refer to the “Data Replication Command Reference”.
YYYY/MM/DD hh:mm:ss: Start/End time (Year Month Day Hour Minute Second)
disk_number: Physical disk number
ld_name: Logical disk name
type: OS type
volume_name: Mount point volume name
path: Drive letter or path name mounted on the NTFS volume folder
accessed by users
Restoring...: The “.” character is dynamically updated until Restore is completed.
On the UNIX system
[Start message]
Restore Start YYYY/MM/DD hh:mm:ss
MV:special_file_name ld_name type
RV:special_file_name ld_name type
[Execution message]
Restoring...
[End message]
Restore Normal End YYYY/MM/DD hh:mm:ss
MV:special_file_name ld_name type
RV:special_file_name ld_name type
Description
The execution message and the end message appear only when -wait has been specified to wait for
the Synchronous State (rpl/sync).
If you do not want the execution message to appear, change the setting of the RPL_WAITMSG
environment variable. For information about environment variables, refer to the “Data
Replication Command Reference”.
YYYY/MM/DD hh:mm:ss: Start/End time (Year Month Day Hour Minute Second)
special_file_name: Special file name
ld_name: Logical disk name
type: OS type
Restoring...: The “.” character is dynamically updated until Restore is completed.