Chapter 4 Functions of ReplicationControl
120
special file.
-vl option: Displays information only associated with specified disk arrays sorted by
using logical disk number as the key. If a specific logical disk number is
specified, the system displays information only associated with the specified
logical disk number.
-ve option: Displays information only associated with specified disk arrays sorted by
using logical disk name as the key. If a specific logical disk name is
specified, the system displays information only associated with the specified
logical disk name.
-ctl option: Lists the special file name and logical disk number of a control volume and
the corresponding disk array name.
-p option: Displays the version information and the date when the volume list was
created as property information of the volume list.
-ax option: Lists disk array information, correspondence of all logical disks, and
property information of the volume list.
[Displayed Information]
(i) When the -r option is specified:
When the volume list is created or updated successfully, the following message appears.
iSM11700: Please wait a minute.
iSM11100: Command has completed successfully.
(ii) When the -d option is specified:
The disk array information as shown below is listed.
--- Disk Array List ---
Disk Array Name Number of LDN
disk_array_name number
Description
disk_array_name: Disk array name
number: Number of logical disk information items (special file) for each disk
array registered in the volume list
(iii) When the -l option is specified:
Information of the correspondence of the logical disks as shown below is listed.
LDN LD NAME VAA TYPE
Special File Disk Array Path
ldn ld_name vaa type
special_file_name disk_array_name path