Chapter 4 Functions of ReplicationControl
170
attribute: Logical disk attribute for the data replication and snapshot functions
Displays only when the -attr option is specified.
link_status: Link state of the link-volume
Displays only when the -attr option is specified. When the target volume is not
a link-volume, “-” (hyphen) appears.
link Connected
unlink Unconnected
On the UNIX system
[Displayed information]
Special file LD Name VAA Type Attribute LV Link Status
special_file_name ld_name vaa type attribute link_status
Description
special_file_name: Special file name
ld_name: Logical disk name
vaa: VAA (Volume Absolute Address)
type: OS type
attribute: Logical disk attribute for the data replication and snapshot functions
Displays only when the -attr option is specified.
link_status: Link state of the link-volume
Displays only when the -attr option is specified. When the target
volume is not a link-volume, “-” (hyphen) appears.
link Connected
unlink Unconnected
[Execution Conditions]
To display a specific volume name, the following conditions must be satisfied.
(i) The target volume or the volume paired with the target volume has been registered in the volume
list.
(ii) The volume list is not being created or updated.
(iii) Specifying a volume of a dynamic disk or a GPT-format partition disk is not allowed (Windows
only).
(iv) The iSM dedicated special file is not being created (HP-UX version UNIX only).
(v) When an LVM volume group or a VxVM disk group is specified, the target volume group or disk
group must be active (UNIX only).
The above execution conditions are not applicable when conducting a joint operation with the iSM
(replication management).