Chapter 4 Functions of ReplicationControl
123
Description
X.X.XXX: Version information of the executed iSMvollist command
YYYY/MM/DD HH:MM:SS: Execution date of the iSMvollist command
disk_array_name: Disk array name
number: Number of logical disk information items (special file) for each
disk array registered in the volume list
ldn: Logical disk number
ld_name: Logical disk name
vaa: VAA (Volume Absolute Address)
type: OS type
special_file_name: Special file name
disk_array_name: Disk array name
path: Whether to use a special file
Usually this field is blank and nothing appears in this field,
however, when data replication or snapshot is performed, if an
error is detected in access to the special file, “B” appears.
version: Version information of the iSMvollist command used to create
the volume list
yyyy/mm/dd hh:mm:ss: Date when the column list was created or updated
host_name: Host name of the server owning the volume list
disk_array_number: Total number of disk arrays in the volume list
volume_number: Total number of volume information items in the volume list
[Execution Conditions]
To create and display the volume list, the following conditions must be satisfied:
(i) While the volume list is being created or updated, it is not possible to display the volume list or
execute replication operation commands and snapshot operation commands.
(ii) While the iSM Server is running on the same server, the volume list only can be displayed, but it
cannot be created or updated. (HP-UX version UNIX system)
(iii) The iSM special file is not being created (HP-UX version UNIX system only).