Chapter 4 Functions of ReplicationControl
143
On the UNIX system
[Start message]
Replicate Start YYYY/MM/DD hh:mm:ss
MV:special_file_name ld_name type
RV:special_file_name ld_name type
[Execution message]
Replicating.....
[End message]
Replicate Normal End YYYY/MM/DD hh:mm:ss
MV:special_file_name ld_name type
RV:special_file_name ld_name type
Description
The execution message and the end message appear only when -wait has been specified to wait
for the Copy completion state.
If you do not want the execution message to appear, change the setting of the RPL_WAITMSG
environment variable. For information about environment variables, refer to the “Data
Replication Command Reference”.
YYYY/MM/DD hh:mm:ss: Start/End time (Year Month Day Hour Minute Second)
special_file_name: Special file name
ld_name: Logical disk name
type: OS type
Replicating...: The “.” character is dynamically updated until Replicate is
completed.
[Execution Conditions]
To perform Replicate, the following conditions must be satisfied.
(i) The target MV and RV have been paired.
(ii) The target MV or RV has been registered in the volume list.
(iii) The volume list is not being created or updated.
(iv) RV has been unmounted from the system.
(v) The disk array that stores the specified MV and RV is not in the Freeze state.
(vi) The Activity State of the target pair is Separate.
(vii) The pair of the specified MV and the paired RV is not in the Restore state.
(viii) When the specified MV is also used as the base-volume (BV) of the snapshot function,
restoration is not being executed from the snapshot-volume (SV).