Chapter 3 Replication Management
79
(i) Selected Volume List
Displays the list of the pair (MV/RV) information selected in the Replication Information screen.
Volumes whose Execution Result is “Unexecutable” cannot be selected because they do not
satisfy the execution conditions.
For the “Unexecutable” volumes, do the following by referring to the Unexecutable Information.
Unexecutable Information Measure
Have Unpaired Execute it for a volume with the pair setting.
Separating Execute it again in the Separated state.
MV Separating Execute it again in the Separated state.
Replicate Execute it for a volume in the Separate state.
MV Replicate Execute it for a volume in the Separate state.
Restore Execute it for a volume in the Separate state.
MV Restore Execute it for a volume in the Separate state.
MV Outside iSM
Management
After execution of RV Forced Unpair, perform Forced unpair for
the volume in MV with the pair setting.
MV Monitoring
Suspended
After execution of RV Forced Unpair, perform Forced unpair for
the volume in MV with the pair setting.
MV Freeze After execution of RV Forced Unpair, perform Forced unpair for
the volume in MV with the pair setting.
MV Force Unpaired Perform Forced Unpair for RV.
RV Separating Execute it again in the Separated state.
RV Replicate Execute it for a volume in the Separate state.
RV Restore Execute it for a volume in the Separate state.
RV Outside iSM
Management
After execution of MV Forced Unpair, perform Forced unpair for
the volume in RV with the pair setting.
RV Monitoring Suspended After execution of MV Forced Unpair, perform Forced unpair for
the volume in RV with the pair setting.
RV Freeze After execution of MV Forced Unpair, perform Forced unpair for
the volume in RV with the pair setting.
RV Force Unpaired Perform Forced Unpair for MV.
Have been registered to
ATgroup
Execute it for a volume that is not registered in the AT-group.
(ii) Summary Display/Details Display
For more information on this item, refer to 3.2.6 “Information Displayed on Execution Dialog”.