Chapter 3 Replication Management
25
Table 3-2 List of Replication-Related Events
Operation Target Operation Replication Management
Operation Other Operations
Freeze { ∆
Defreeze { ∆
Disk array
Change Background Copy level { ∆
Pair Setting/Unpair { ∆
Replicate { ∆
Synchronous State (rpl/sync) ∆ ∆
Separate { ∆
Separated ∆ ∆
Restore { ∆
Synchronous State (rst/sync) ∆ ∆
Suspend/Resume Copy { ∆
Change to Background Copy { ∆
Change RV Mode { ∆
Volume
Change Copy Mode { ∆
{: Regular report ∆: Additional report performed according to an environment setting −: Not reported
Note: Replication management operations include operations performed together with the
ReplicationControl commands.
Regarding S2100 and A2100, the detection of events other than pair setting and unpairing events
may not be possible during the state monitoring.
Furthermore, the state monitoring monitors all the disk arrays’ volumes for a specified time
interval (default: 15 seconds) to detect events. Therefore, there is a time difference between
when an event actually occurred and when a message is output. Also, messages for each
detected event are displayed at the same time.
For information about an environment setting regarding the state monitoring’s event detection
time interval and operation message output control, refer to the “User’s Manual” or “User’s
Manual (UNIX)” in accordance with your OS.