Chapter 3 Replication Management
55
(i) Selected Volume List
Displays the list of the pair (MV/RV) information selected in the Replication Information screen.
Volumes whose Execution Result is “Unexecutable” cannot be selected because they do not
satisfy the execution conditions.
For the “Unexecutable” volumes, do the following by referring to the Unexecutable Information.
Unexecutable Information Measure
Have Unpaired Execute it for a volume with a volume of the Synchronous state.
Separated Execute it for a volume in the Synchronous state.
Restoring Execute it again when Restored is completed.
Suspend State Execute it again in the Synchronous state after copy is resumed.
Abnormal Suspend Refer to 2.2.2 “HW Fault Unique to Replication” in the “Data
Replication User’s Manual (Installation and Operation Guide for
Windows)” to recover from the failure.
Freeze Defreeze the Data Replication function and execute it again.
MV Monitoring
Suspended
Change the disk array of MV to the Monitored state and execute it
again.
RV Monitoring
Suspended
Change the disk array of RV to the Monitored state and execute it
again.
MV Force Unpaired Perform Forced Unpair for RV.
RV Force Unpaired Perform Forced Unpair for MV.
RV Forced Separate Execute it for a volume in the Synchronous state.
MV Outside iSM
Management
Execute it for a pair under the iSM management.
All Link Path Abnormal Refer to 2.2.2 (2) “Link fault” in the “Data Replication User’s
Manual (Installation and Operation Guide for Windows)” to recover
from the failure.
Have been registered to
ATgroup
Execute it for a pair that is not registered in the AT-group.
(ii) Summary Display/Details Display
For more information on this item, refer to 3.2.6 “Information Displayed on Execution Dialog”.