Problem Checklist
First check the items in the following list. If these items don't help, see the table that follows the list.
•Power to the notebook is on.
•The AC power outlet to which your AC adaptor is connected is working. Test the outlet by plugging in a lamp or other electrical device.
•All cables are tightly connected.
•The display setting is configured correctly.
•The display brightness control is adjusted properly.
•If using battery power, check that the battery pack is properly inserted and fully charged.
Problem
The notebook does not power on
Resolution
If you are operating the notebook with battery power, check that the battery pack is correctly inserted. Attach the AC adaptor to recharge the battery.
If you have the AC adaptor attached, check that you are using a working AC power outlet.
LCD screen is dark and blank
Battery power does not last long
Information on the LCD is difficult to see
An optional component does not work
The Standby/Resume function does not work.
Screen brightness needs adjustment. Use the specific functions keys. The notebook entered Standby mode due to low battery power. Plug in the AC adaptor before resuming operation.
| Use |
|
|
| ||
|
| For more information, please refer to: Windows Vista® Operating |
| Page |
| |
|
| System Introduction → Managing System Power in this |
| 31 |
| |
|
| Electronic User’s Guide. |
|
|
| |
| Fully charge and discharge the battery several times to recondition it. |
|
|
| ||
| Replace the battery. |
|
|
| ||
|
| For more information, please refer to: Introducing Your NEC |
| Page |
| |
|
| VERSA → Using the Battery ; and |
| 21 |
| |
|
|
|
|
|
|
|
|
| Introducing Your NEC VERSA → Replacing the Battery in this |
|
| Page |
|
|
|
|
| 23 |
| |
|
| Electronic User’s Guide. |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| ||
| Use the specific functions keys to adjust the brightness control. |
|
|
| ||
| Tilt the LCD screen slightly forward or backward. |
|
|
| ||
|
|
|
|
| ||
|
|
|
|
| ||
| Make sure the component is securely installed or connected. |
|
|
|
Refer to the optional component documentation.
If the notebook does not enter Standby mode, a disk drive might be busy. Wait until the disk drive stops and try again.
If notebook does not resume, it may have auto suspended on a low battery. Attach the AC adaptor and try again.
68