NEC P8510 Electrostatic Discharge ESD and ESD Protection, Product Storage Environment Guidelines

Electrostatic Discharge (ESD) and ESD Protection

WARNING

Electrostatic Discharge (ESD) can damage disk drives, cards, memory modules and other parts. We recommend that you carry out all procedures in this guide only at an ESD-workstation. If one is not available, provide some ESD protection by wearing an antistatic wrist strap attached to any unpainted metal surface when handling parts. If you do not have one, discharge static electricity from yourself and your clothing by touching a nearby metal surface before handling any internal components.

Product Storage Environment Guidelines

1.When the product is in use (or started up):

•This product is best used in temperatures from 15ºC to 25ºC, although it will operate normally from 5ºC to 35ºC.

•Avoid placing the product in a dusty environment as excessive dust might be sucked into the machine body, reducing its cooling efficiency.

•Do not try to block any ventilation holes as you may cause the product to over-heat.

•Do not place the product in a humid environment to avoid rusting or corrosion due to excessive water vapourisation.

2.When the product is shut down.

•Avoid placing the product for a prolonged time in hot environments (with an excessive temperature of above 60ºC) as that can damage the LCD panel or cause the battery pack to explode or leak.

•If you plan to keep the product unused for a long period, do charge the battery to full capacity and then disconnect the battery pack before putting the notebook in storage.

•Avoid placing the product in extreme cold conditions (below 0ºC).

Recommended Environment

Operation

•Temperature: 5°C to 35°C

•Relative Humidity: 10% to 80% (Non-condensing)

•Gradient: 10°C/hr

88