NEC SX4000 user manual Mechanical, Usa, Vcci, Oceania EN60950 AS/NZS3548 Class a Asia, CISPR22

External Control	RS232C(1) D-sub 9 pin
	Contact Closure
	Switcher	(2) D-sub 15 pin In/Out
	Addressable Remote Control (wired / wireless)
Power Requirement	100-120 / 200-240 VAC, 50/60Hz
Input Current	11 / 7.5 A
Power Consumption	1.1 / 1.5 kW

Mechanical

Installation	Orientation:	Floor/Front, Floor/Rear, Ceiling/Front, Ceiling/Rear
	Stacking:	Up to 3 projectors can be gravity stacked
Dimensions	22.0" (W) x 26.9" (D) x 11.8" (H) / 560 mm (W) x 682 mm (D) x 300 mm (H)
	with lens hood and foot
	(not including handle, stacking pad and protrusions)
Net Weight	94.8 lbs (43Kg) (not including lens)
Environment	Operational Temperature			40˚ to 95˚F / 5˚ to 35˚C,
	Humidity: 20-80% non-condensing
	Storage: 14˚ to 122˚F / -10˚ to 50˚C
Regulations	USA	UL 1950 FCC Class A
	Canada	CSA950 ( C-UL )
	Europe	EN60950	EN55022 Class A		EN55024 EN61000-3-2	EN61000-3-3
	Japan	J60950	VCCI
	Oceania	EN60950	AS/NZS3548		Class A
	Asia	EN60950	CISPR22		Class A

*1: SX6000: Permissible deviation for RGB convergence (Pixel deviation) is 3/4 pixel or less at center; 1 pixel or less around the perimeter (when projection upward angle is 0˚).

SX4000: Permissible deviation for RGB convergence (Pixel deviation) is 1 pixel or less at center; no space between two color pixels around the perimeter (when projection upward angle is 0˚).

*2: When using the zoom lens, it is recommended that the projector is positioned at an angle of from -15 to +15 degrees from the horizontal.

Specifications are subject to change without notice.

Digital Light Processing, DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments.

E – 42