NEC SX4000 user manual Help, Link Mode, Switcher Control, Contents

Keystone Save

This option enables you to save your current keystone settings. Saving your change once affects all sources. The changes are saved when you turn off the projector.

Doubler (Video / S-Video Only)

This sets double speed interpolation of the video signal.

On	Non-interlaced display
Off	Interlaced display

NOTE: The setting will take effect from the next video signal display.

Lens Memory

This function applies the stored lens shift, focus, and zoom adjust- ment values to the selected signal.

The function performs a setting that enables or disables the "Adjust (Source)" - "Lens Memory" functions of the menu.

•On -- Enables the lens memory function and apply the stored shift, focus, and zoom setting values to the selected signal.

•Off -- Disables the lens memory function so that there will be no applica- tion of stored shift, focus, and zoom setting values.

NOTE: The shift, focus, and zoom adjustment values can be stored regard- less of whether or not the lens memory function is enabled.

NOTE: In the Link mode the Lens Memory feature is not available.

User Name

Type in your desired name using the INPUT buttons on the remote control.

Select one character at a time with the INPUT buttons 1 through 10(0) and by moving the cursor with the SELECT button. The user name must be 18 characters or less.

Only after completely finishing the selection of the characters, press

ENTER.

[Page 5]

Communication Speed:

This feature sets the baud rate of the PC CONTROL connector (Mini D-Sub 9 Pin).

It supports data rates from 4800 to 38400 bps.

The default is 38400 bps. Select the appropriate baud rate for your equipment to be connected.

Projector ID:

Each projector needs its own unique addresses when used in serial communication mode. You can choose one of 64 unique address using the spin box. First select Enable. Keep pressing increases the number.

To make your setting available, select OK.

Default Source Select

You can set the projector to default to any one of its inputs each time the projector is turned on.

Last	Sets the projector to default to the previous or last active in-
	put each time the projector is turned on.
Select	Displays the selected source input every time the projector is
	started up. Select an input from the pull-down menu.

Link Mode

This feature is used for multiple projector connection using RGB Digital Input/Output connectors. The master projector is set to Master. The other slave projectors are set to Slave. When not using Link mode, set to Standalone. See page E-14 for setting up for double stacking in link mode.

Switcher Control

This feature sets the projector in communication with the NEC ISS- 6020 Switchers.

Stand Alone	Use the projector in stand alone operation.
SW 1 Level	Use the projector with one Switcher. (not available
	in Link mode)
SW 2 Level	Use the projector with two or more Switchers. (not
	available in Link mode)

When changing this setting, the confirmation message will appear. If you want to restart your projector, select Yes; if not, select No.

NOTE: This setting becomes effective only after the projector is restarted.

Help

Contents

Provides an online help about how to use the menus. An underlined link means that you can move to an adjustment item directly.

Selecting the underlined link and pressing ENTER moves to the corre- sponding adjustment item.

NOTE: The Help Menu may not be displayed correctly when a UXGA signal is displayed.

E – 39