Top Features
9
1 |
|
| 8 |
|
|
| |
SOURCE |
|
| |
|
| AUTO | ADJUST |
| STATUS | ||
|
| ||
ON POWER |
| ||
STAND | BY |
| |
3 |
|
| |
|
| T | |
| 2 |
| E |
|
| E | |
|
|
| N |
|
|
| R |
6
4 7
MENU
SELECT
CANCEL
5
1. Power Button (ON / STAND BY) ( )
Use this button to turn the power on and off when the power is supplied and the projector is in standby mode.
NOTE: To turn off the projector, press and hold this button for minimum of two seconds.
2.Status Indicator
When this is lit red continually, it’s warning you that the projection lamp has exceeded 1000 hours (up to 2000 hours in Eco 2 mode and 1500 hours in Eco 1 mode) of service. After this light appears, it is advisable to replace the projection lamp as soon as possible. (See page
“The lamp has reached the end of its usable life. Please re- place the lamp.” appears each time the projector is turned on until the lamp is replaced.
If this light blinks red rapidly, it indicates that the lamp cover or filter cover is not attached properly or the projector is over- heated. See the Power / Status Light Messages on page
3.Power Indicator
When this indicator is green, the projector is on; when the indicator is orange, it is in standby mode.
4.Select (
) / (+)
: Use these buttons to select the menu of the item you wish to adjust.
: Use these buttons to change the level of a selected menu item.
When an image is magnified, these buttons can be used to move the image on screen.
5.Cancel Button
Press this button to exit the menu. While you are in the adjust- ment or setting menu, pressing this button will return to the previous menu.
6.Enter Button
Executes your menu selection and activates items selected from the menu.
7.Menu Button
Displays the menu.
8.Auto Adjust Button
Use this button to adjust
9.Source Button
Use this button to select a video source such as a PC, VCR or DVD player.
Each time this button is pressed, the input source will change
as follows:
→RGB → Video →
If no input signal is present, the input will be skipped.
