Position/ Clock (when Auto Adjust is off):
Position/Clock
Horizontal100
Vertical50
Clock800
Phase50
This allows you to manually adjust the image horizontally and vertically, and adjust Clock and Phase.
<Horizontal/Vertical Position>
Adjusts the image location horizontally and vertically using the 
and 
buttons.
This adjustment is made automatically when the Auto Ad- just is turned on.
<Clock>
Use this item with the “Auto Adjust off” to fine tune the computer image or to remove any vertical banding that might appear. This function adjusts the clock frequencies that elimi- nate the horizontal banding in the image. Press the 
and 
buttons until the banding disappears. This adjustment may be necessary when you connect your computer for the first time. This adjustment is made automatically when the Auto Adjust is turned on.
<Phase>
Use this item to adjust the clock phase or to reduce video noise, dot interference or cross talk. (This is evident when part of your image appears to be shimmering.) Use the 
and 
buttons to adjust the image.
Use “Phase” only after the “Clock” is complete.
This adjustment is made automatically when the Auto Ad- just is turned on.
See “Auto Adjust (RGB Only)” on page
Resolution (when Auto Adjust is off):
Resolution
Auto | Native |
This allows you to activate or deactivate the Advanced AccuBlend feature.
Auto: | Turns on the Advanced AccuBlend feature. |
| The projector automatically reduces or en- |
| larges the current image to fit the full screen. |
Native: | Turns off the Advanced AccuBlend feature. |
| The projector displays the current image in |
| its true resolution. |
| See “Auto Adjust (RGB Only)” on page E- |
| 34 for turning on or off the Auto Adjust fea- |
| ture. |
NOTE: When an image with a resolution of SVGA, XGA or SXGA is displayed, the Resolution is not available.
NOTE: Once the Resolution setting has been changed, the “Aspect” setting is automatically changed to “Normal”.
Video Filter (when Auto Adjust is off):
| Video Filter |
|
|
|
| Off | Less | More |
|
|
|
|
| |
This function reduces video noise. |
|
| ||
Off: | The | |||
Less: | The | |||
More: | The | |||
Screen adjustments are possible even when the filter is on.
Factory Default
Factry Default
All Data
Current Signal
Changes all adjustments and settings to the factory preset.
<All Data>
Reset all the adjustments and settings for all the signals to the factory preset.
The items can be reset except Language, Communication Speed, Lamp Remaining Time, Lamp Hour Meter, Filter Usage, and Projector Usage. To reset the lamp usage time, see “Clear Lamp Hour Meter” and “Clear Filter Usage” page
All Data Reset
Are you sure ?
Yes
No
<Current Signal>
Resets the adjustments for the current signal to the factory preset levels.
The items that can be reset are: Brightness, Contrast, Color, Hue, Sharpness, Volume, Aspect, Horizontal Position, Ver- tical Position, Clock, Phase, Resolution, Video Filter, Gamma Correction, Color Correction, and White Balance.
Current Signal Reset
Are you sure ?
Yes
No
